Congressional Serial Set

Cover
U.S. Government Printing Office, 1906
Reports, Documents, and Journals of the U.S. Senate and House of Representatives.
 

Andere Ausgaben - Alle anzeigen

Häufige Begriffe und Wortgruppen

Beliebte Passagen

Seite 13 - Second-feet per square mile" is the average number of cubic feet of water flowing per second from each square mile of area drained, on the assumption that the run-off is distributed uniformly both as regards time and area. "Run-off in inches...
Seite 8 - ... highest. As the gage height is the mean for the day it does not indicate correctly the stage when the water surface was at crest height, and the corresponding discharge was consequently larger than given in the maximum column. Likewise, in the column headed "Minimum" the quantity given is the mean flow for the day when the mean gage height was lowest. The column headed "Mean" is the average flow in cubic feet for each second during the month.
Seite 4 - ... for the day when the mean gage height was highest. As the gage height is the mean for the day, it does not indicate correctly the stage when the water surface was at crest height, and the corresponding discharge was consequently larger than given in the maximum column. Likewise, in the column of "Minimum" the quantity given is the mean flow for the day when the mean gage height was lowest. The column headed "Mean" is the average flow in cubic feet for each second during the month.
Seite 15 - The plotting of results of the various discharge measurements, using gage heights as ordinates, and discharge, mean velocity, and area as abscissas, will define curves which show the discharge, mean velocity, and area corresponding to any gage height. For the development of thesc curves there should be. therefore, a sufficient number of discharge measurements to cover the range of the stage of the stream.
Seite 4 - ... they also give, as far as possible, a complete history of all the changes that have occurred since the establishment of the station that would be factors in using the data collected. The discharge-measurement table gives the results of the discharge measurements made during the year, including the date...
Seite 14 - The data necessary for the construction of a rating table for a velocity-area station are the results of the discharge measurements, which include the record of stage of the river at the time of measurement, the area of the cross section, the mean velocity of the current, and the quantity of water flowing.
Seite 8 - The gage height given in the table represents the elevation of the surface of the water above the zero of the gage. At most stations the gage is read in the morning and in the evening.
Seite 8 - The table of daily gage heights gives the daily fluctuations of the surface of the river as found from the mean of the gage readings taken each day.
Seite 132 - Jan. Feb. Mar. Apr. May. Juno. July. Aug. Sept. Oct.

Bibliografische Informationen