Water-supply and Irrigation Papers of the United States Geological Survey, Bände 177-181

Cover
U.S. Government Printing Office, 1906
 

Andere Ausgaben - Alle anzeigen

Häufige Begriffe und Wortgruppen

Beliebte Passagen

Seite 4 - Second-feet per square mile" is the average number of cubic feet of water flowing per second from each square mile of area drained, on the assumption that the run-off is distributed uniformly both as regards time and area. "Run-off in inches...
Seite 131 - The serial publications of the United States Geological Survey consist of (1) Annual Reports, (2) Monographs, (3) Professional Papers, (4) Bulletins, (5) Mineral Resources, (6) Water-Supply and Irrigation Papers, (7) Topographic Atlas of United States — folios and separate sheets thereof, (8) Geologic Atlas of United States — folios thereof.
Seite 5 - British imperial gallons per second. 1 second-foot for one year covers 1 square mile 1.131 feet or 13.572 inches deep. 1 second-foot for one year equals 31,536,000 cubic feet. 1 second-foot equals about 1 acre-inch per hour.
Seite ii - Underground waters of Tennessee and Kentucky west of Tennessee River and of an adjacent area in Illinois, by LC Glenn.
Seite 3 - DEFINITION OF TERMS. The volume of water flowing in a stream — the "run-off" or "discharge" — is expressed in various terms, each of which has become associated with a certain class of work. These terms may be divided into two groups: (1) Those which represent a rate of flow, as secondfeet, gallons per minute, miner's inches, and...
Seite 2 - Run-off" (depth in inches) is the depth to which the drainage area would be covered if all the water flowing from it in a given period were conserved and uniformly distributed on the surface. It is used for comparing run-off with rainfall, which is usually expressed in depth in inches. An "acre-foot...
Seite 5 - States gallons equals 3.07 acre-feet. 1,000,000 cubic feet equals 22.95 acre-feet. 1 acre-foot equals 325,850 gallons. 1 inch deep on 1 square mile equals 2,323,200 cubic feet. 1 inch deep on 1 square mile equals 0.0737 second-foot per year. 1 foot equals 0.3048 meter. 1 mile equals 1.60935 kilometers.
Seite 2 - ... for the day when the mean gage height was highest. As the gage height is the mean for the day, it does not indicate correctly the stage when the water surface was at crest height, and the corresponding discharge was consequently larger than given in the maximum column. Likewise, in the column of "Minimum" the quantity given is the mean flow for the day when the mean gage height was lowest. The column headed "Mean" is the average flow in cubic feet for each second during the month.
Seite 4 - ... was highest. As the gage height is the mean for the day it does not indicate correctly the stage when the water surface was at crest height, and the corresponding discharge was consequently larger than given in the maximum column. Likewise, in the column headed "Minimum" the quantity given is the mean flow for the day when the mean gage height was lowest. The column headed "Mean" is the average flow in cubic feet for each second during the month.
Seite 131 - Survey, from whom they may be obtained, free of charge (except classes 2, 7, and 8), on application. 2. A certain number are delivered to Senators and Representatives in Congress, foi distribution.

Bibliografische Informationen