Bi-monthly Bulletin of the American Institute of Mining Engineers, Volumes 19-21

Front Cover
American Institute of Mining and Metallurgical Engineers., 1908 - Mineral industries
 

Other editions - View all

Common terms and phrases

Popular passages

Page 288 - Report on the Coal Measures of the plateau region of Alabama; by Henry McCalley. Including a report on the Coal Measures of Blount County; by AM Gibson.
Page 222 - Generically, iron containing so much carbon or its equivalent that it is not malleable at any temperature.
Page liii - This will be the fame of Watt with future generations ; and it is sufficient for his race and his country. But to those to whom he more immediately belonged, who lived in his society, and enjoyed his conversation, it is not perhaps the character in which he will be most frequently recalled — most deeply lamented — or even most highly admired.
Page 178 - The state of pronounced alteration is the disintegration of the firm rock into a mass of hard, angular fragments, varying in size from that of a bean to that of a human fist, which apparently do not readily disintegrate on exposure to the weather. The second stage of alteration, due to further weathering, yields a compact mass, the so-called "green ground," showing various shades of light olive green, and often bluish in tint when moist, but becoming yellowish on drying.
Page 288 - Transactions 1 and elsewhere,2 but rather to take a more comprehensive view of the industry and its surroundings as a whole, marking its general development and the lines of its future progress. In a paper entitled Deep-Level Shafts...
Page 225 - MALLEABLE PIG IRON, an American trade name for the pig iron suitable for converting into malleable castings through the process of melting, treating when molten, casting in a brittle state, and then making malleable without remelting. The term should be used with care to avoid confusion. This material is also called in trade in America
Page 225 - Steel. — Iron which is malleable at least in some one range of temperature, and in addition is either (a) cast into an initially malleable mass, or (6) is capable of hardening greatly by sudden cooling, or (c) is both so cast and so capable of hardening.
Page 288 - Councils of the Iron and Steel Institute, the Institution of Mining and Metallurgy, the Institute of British Foundrymen, the Institute of Metals, and the Institution of Metallurgists.
Page 116 - ... the tubes being fastened therein by being expanded. Each " header " is provided with hand-holes placed opposite the end of each tube, of sufficient size to permit the cleaning, removal and renewal of a tube and having a cap fastened with wroughtiron bolt and clamp and cap-nut. The several sections are connected at each end to two steam- and water-drums, and at one end with a mud-drum, by means of wrought-iron lapwelded tubes, 4 in. in diameter and of suitable length, the joints being made with...
Page 234 - Mr. Calvin W. Rice, Secretary of the American Society of Mechanical Engineers, kindly provided copies of a pamphlet describing the tunnels of the Hudson Companies, prepared by Mr.

Bibliographic information