Was andere dazu sagen - Rezension schreiben
Es wurden keine Rezensionen gefunden.
Andere Ausgaben - Alle anzeigen
angle applied axis base beam bearing body called cast centre circle circular circumference color compasses cone connected construction curve cylinder depth describe determined diameter direction distance divide division draw drawn edge effect elevation equal example extreme face feet figure fixed foot force four frame give given half horizontal inches inclined intersection iron length less light marked means measure method motion necessary object outline parallel passing perpendicular piece pitch placed plane plate portion position pressure PROB produce projection proportion pulley radius represent roof round rule scale screw shade shadow shaft side similar space square straight line strain supported supposed surface taken tangent teeth thickness tint tion tooth triangle upper usual vertical wall weight wheel width window
Seite 3 - A circle is a plane figure contained by one line, which is called the circumference, and is such that all straight lines drawn from a certain point within the figure to the circumference, are equal to one another.
Seite 80 - The projection of a point upon a plane is the foot of the perpendicular from the point to the plane.
Seite 2 - When several angles are at one point B, any one of them is expressed by three letters, of which the letter that is at...
Seite 121 - The strength of a pillar, with one end round and the other flat, is the arithmetical mean between that of a pillar of the same dimensions with both ends round, and one with both ends flat. Thus, of three...
Seite 33 - This done, press the protractor gently down, which will fix it in position by means of very fine points on the under side. It is now ready to lay off the given angle, or any number of angles that may be required, which is done by turning the pinion d till the opposite vernier reads the required angle. Then press downwards the branches...
Seite 117 - VIII, leads to the following remarkable conclusion, easily fixing itself in the memory, that with the unguents, hogs* lard and olive oil interposed in a continuous stratum between them, surfaces of wood on metal, wood on wood, metal on wood, and metal on metal, when in motion, have all of them very nearly the same co-efficient of friction, the value of that co-efficient being in all cases included between 0,07 and 0,08, and the limiting angle of resistance therefore between 4° and 4° 35'.
Seite 384 - Having poured a little of the solution into a flat dish, the pictures are to be introduced into it one by one; daylight will not now injure them ; let them soak for two or three minutes, or even longer if strongly printed, turning and moving them occasionally. The remaining unreduced salts of silver are thus thoroughly dissolved, and may now, with...
Seite 20 - ... or 2-53, according as the primary divisions are taken as hundreds, tens, or units. General Rule. — To take off any number to three places of figures upon this vernier scale. Increase the first figure by one; subtract the third figure from the second, borrowing one- from- the first increased figure, if necessary, and extend the compasses from the division upon the vernier -scale, indicated by the third figure, to the subdivision indicated by the number remaining after performing the above subtraction.
Seite 38 - MOUNTING PAPER AND DRAWINGS, VARNISHING, ETC. In mounting paper upon canvas, the latter should be well stretched upon a smooth flat surface, being damped for that purpose, and its edges glued down as was recommended in stretching drawing paper. Then with a brush spread strong paste upon the canvas, beating it in till the grain of the canvas be all filled up; for this, when dry, will prevent the canvas from shrinking when subsequently removed ; and, having cut the edges of the paper straight, paste...