Waterproofing Engineering for Engineers, Architects, Builders, Roofers and WaterproofersJohn Wiley & sons, Incorporated, 1919 - 442 Seiten |
Inhalt
| 1 | |
| 7 | |
| 13 | |
| 19 | |
| 25 | |
| 31 | |
| 40 | |
| 46 | |
| 189 | |
| 195 | |
| 209 | |
| 217 | |
| 224 | |
| 231 | |
| 238 | |
| 247 | |
| 52 | |
| 58 | |
| 65 | |
| 72 | |
| 78 | |
| 84 | |
| 91 | |
| 95 | |
| 101 | |
| 108 | |
| 114 | |
| 120 | |
| 126 | |
| 134 | |
| 140 | |
| 147 | |
| 153 | |
| 166 | |
| 176 | |
| 184 | |
| 254 | |
| 260 | |
| 262 | |
| 273 | |
| 280 | |
| 293 | |
| 305 | |
| 313 | |
| 319 | |
| 331 | |
| 353 | |
| 360 | |
| 368 | |
| 379 | |
| 388 | |
| 395 | |
| 403 | |
| 413 | |
| 423 | |
Andere Ausgaben - Alle anzeigen
Häufige Begriffe und Wortgruppen
aggregate applied asbestos asbestos shingles asphalt mastic binder bitumen brick brick-in-mastic burlap Catskill Aqueduct cement mortar cent coal-tar pitch consistency construction cotton fabric cracks crete dampproofing distillation ductility Engineering expansion joints Fahr feet flashing floor gilsonite grade gravel grout heated hydrated lime impermeable impervious inches iron joint filler jute fabric kettles laid layer less limestone linseed oil liquid masonry melting melting-point membrane metal mineral mixed mixture mopped mortar coat nails naphtha Open-mesh paraffin penetration petroleum petrolic ether pipe placed plies Portland cement pounds powdered practice pressure proofing proportions protective roof sand saturated and coated seams SECTION shingles shown in Fig sieve soap specific gravity Specifications for Waterproofing specimens square steel stone strip structure Subway surface coating system of waterproofing tank temperature thick tiles treated felt trowel tunnel usually walls waterproofing compounds waterproofing materials watertight weight
Beliebte Passagen
Seite 193 - One hundred cubic centimeters of chemically pure carbon disulphide is poured into the flask in small portions, with continual agitation, until all lumps disappear and nothing adheres to the bottom. The flask is then corked and set aside for 15 minutes.
Seite 272 - The sample shall be a fair average of the shipment. Three per cent of the packages shall be sampled. The sample shall be taken from the surface to the center of the package. A 2-lb.
Seite 217 - The upper surface of the cover should burn clear, but the under surface should remain covered with carbon. To find Volatile Combustible Matter, subtract the per cent.
Seite 414 - Blown Petroleums. — Semi-solid or solid products produced primarily by the action of air upon liquid native bitumens which are heated during the blowing process.
Seite 415 - Carbenes: — The components of the bitumen in petroleums, petroleum products, malthas, asphalt cements and solid native bitumens, which are soluble in carbon disulphide but insoluble in carbon tetrachloride.
Seite 413 - Solid or semi-solid native bitumens, solid or semisolid bitumens obtained by refining petroleum, or solid or semi-solid bitumens which are combinations of the bitumens mentioned with petroleums or derivatives thereof, which melt upon the application of heat and which consist of a mixture of hydrocarbons and their derivatives of complex structure, largely cyclic and bridge compounds.
Seite 273 - Samples which represent rejected hydrated lime shall be preserved in airtight containers for five days from the date of the test report. In case of dissatisfaction with the results of the tests, the manufacturer may make claim for a rehearing within that time.