 | American Society of Civil Engineers - Civil engineering - 1903 - 896 pages
...centering FIO. B. the briquettes in the testing machine, as cross-strains, produced by improper centering, tend to lower the breaking strength. The load should...bearing. The load should be applied at the rate of 600 Ibs. per minute. The average of the briquettes of each sample tested should be taken as the test, excluding... | |
 | Myron Samuel Falk - Cement - 1904 - 198 pages
...clip should be IV ins. Form of Clip. PIG. B. 68. — Test pieces should be broken as soon as they are removed from the water. Care should be observed in...bearing. The load should be applied at the rate of 600 Ibs. per minute. The average of the briquettes of each sample tested should be taken as the test, excluding... | |
 | Albert Bleininger - Cement - 1904 - 414 pages
...in centering the briquettes in the testing machine, as cross-strains produced by improper centering tend to lower the breaking strength. The load should...must be taken that the clips and the sides of the briquettes be clean and free from sand or dirt, which would prevent a good bearing. The load should... | |
 | Geology - 1904 - 430 pages
...in centering the briquettes in the testing machine, as cross-strains produced by improper centering tend to lower the breaking strength. The load should...reached. Care must be taken that the clips and the sides o£ the briquettes be clean and free from sand or dirt, which would prevent a good bearing. The load... | |
 | Ohio. Division of Geological Survey - Geology - 1904 - 416 pages
...in centering the briquettes in the testing machine, as cross-strains produced by improper centering tend to lower the breaking strength. The load should...produce vibration, the shock from which often breaks thfc briquette before the ultimate strength is reached. Care must be taken that the clips and the sides... | |
 | Albert Bleininger, Geological Survey of Ohio - Cement - 1904 - 418 pages
...in centering the briquettes in the testing machine, as cross-strains produced by improper centering tend to lower the breaking strength. The load should...may produce vibration, the shock from which often ANNUAL REPORT breaks the briquette before the ultimate strength is reached. Care must be taken that... | |
 | Frederick Winslow Taylor, Sanford Eleazer Thompson - Concrete - 1905 - 664 pages
...centering the briquettes in the testing machine, as cross-strains, produced by improper centering, tend to lower the breaking strength. The load should...bearing. The load should be applied at the rate of 600 Ib. per minute. The average of the briquettes of each sample tested should be taken as the test, excluding... | |
 | W. Purves Taylor - Cement - 1905 - 344 pages
...centering the briquettes in the testing machine, as cross-strains, produced by improper centering, tend to lower the breaking strength. The load should...bearing. The load should be applied at the rate of 600 Ibs. per minute. The average of the briquettes of each sample tested should be taken as the test, excluding... | |
 | Frederick Winslow Taylor, Sanford Eleazer Thompson - Concrete - 1905 - 642 pages
...centering the briquettes in the testing machine, as cross,strains, produced by improper centering, tend to lower the breaking strength. The load should...from grains of sand or dirt, which would prevent a g_ood bearing. The load should be applied at the rate of 600 Ib. per minute. The average of the briquettes... | |
| |
Test pieces should be broken as soon as they are removed from the water. Care should be observed in centering the briquettes in the testing machine, as cross-strains, produced by improper centering, tend to lower the breaking strength. The load should... 
